Found a few USP 9 mags and 30rd G36 mags while cleaning out the gun safe. Don't own either gun anymore. The mags are factory but used. What is the going rate for them?
↧
HK USP and G36 mags
↧
Beth's Inbox
You can reach me here or email me at beth@nefariousarms.com with any questions you may have.
↧
↧
WTS: Date Coded MP5 and UMP 45 Mags
10 Pack of New Old Stock MP5 30rd mags. 5 IG ('86) and 5 are IF ('85). If you just want 5 mags, cost is $425 plus actual cost of shipping or $850 for all 10 plus shipping.
![]()
3 Pack of Used, but in excellent condition (I think one of them is new, never used) date coded mags II, IG, IE. $195 shipped.
![]()
![]()
![]()
5 Pack of Like New German UMP 45 acp mags. I've been downsizing my collection and don't need to hang on to these anymore. Used them once, literally once and never got to use them again. They are clean, never dropped and have been sitting in climate controlled safe for the last few years. $350 Shipped
![]()
![]()
![]()
![]()
Shipping is limited to Continental USA ONLY and includes tracking number. US Postal Money Order, Bank Transfer via Zelle. No Paypal on this one due to their gun restriction policy. I don't make the rules, but I do follow them. No sales outside the US. If this item is illegal in your state, ie High Cap Mags will not be sold to NJ, NY, MD, CA, CO, CT, DC, HI, IL, and/or MA only exception is for the date coded MP5 mags.
3 Pack of Used, but in excellent condition (I think one of them is new, never used) date coded mags II, IG, IE. $195 shipped.
5 Pack of Like New German UMP 45 acp mags. I've been downsizing my collection and don't need to hang on to these anymore. Used them once, literally once and never got to use them again. They are clean, never dropped and have been sitting in climate controlled safe for the last few years. $350 Shipped
Shipping is limited to Continental USA ONLY and includes tracking number. US Postal Money Order, Bank Transfer via Zelle. No Paypal on this one due to their gun restriction policy. I don't make the rules, but I do follow them. No sales outside the US. If this item is illegal in your state, ie High Cap Mags will not be sold to NJ, NY, MD, CA, CO, CT, DC, HI, IL, and/or MA only exception is for the date coded MP5 mags.
↧
WTS: USP9 V7 LEM, Night Sights and 3 mags
New, Black USP 9 fullsize, BG purchased in 2017 with night sights and 3 15 round mags. $875 plus $15 shipping. Additional 9mm 15rd mags are $32.
![]()
![]()
![]()
Please have your inbound FFL on board with receiving firearms beforehand Its helpful to know what they require to do the transfer ahead of time so I can send this off ASAP. I dont to wait for my purchased to be shipped so I reciprocate to those I sell to. If in-state (PA), FFL must be involved and you cover the transfer fee. My LGS is in Allentown (18104) and can do transfer at a very reasonable price. I can let you know ahead of time what that cost is. Just PM me directly. No Trades or splitting the frame from slide at this time. Payment: US Postal money order, Bank cashiers check, Bank Transfer using Zelle or cash.
Please have your inbound FFL on board with receiving firearms beforehand Its helpful to know what they require to do the transfer ahead of time so I can send this off ASAP. I dont to wait for my purchased to be shipped so I reciprocate to those I sell to. If in-state (PA), FFL must be involved and you cover the transfer fee. My LGS is in Allentown (18104) and can do transfer at a very reasonable price. I can let you know ahead of time what that cost is. Just PM me directly. No Trades or splitting the frame from slide at this time. Payment: US Postal money order, Bank cashiers check, Bank Transfer using Zelle or cash.
↧
USP Compact 45 auto (tactical) rarity
How rare today is a USP Compact 45 auto with matching serial numbers on box, frame, and threaded barrel and no visible import marks?
Thank you hkpro and members
Thank you hkpro and members
↧
↧
Taurus G3 $249, Taurus G2C $179, Ruger American $169, Heritage Rough Rider 16" $159, ATI GSG FireFly $151, Ruger 10/22 $199
Taurus G3 $249, Taurus G2C $179, Ruger American $169, Heritage Rough Rider 16" $159, ATI GSG FireFly $151, Ruger 10/22 $199, KelTec KSG $607, Taurus 856 $195, Taurus RagingBull $469, PSA PA10 $749, ATN X-Sight $309, EOTech XPS2-0 $389, Vortex Viper $349
Subscribe to our weekly newsletter to get the best deals directly in your inbox. Click HERE to subscribe!
Subscribe to our weekly newsletter to get the best deals directly in your inbox. Click HERE to subscribe!
↧
How accurate is your MP5SD?
Title basically says it all
How accurate is your MP5D?
I built one earlier this year. It generally has more than acceptable accuracy. Holds fist sized groups at 25 yards. Honestly haven't papered it past that.
However I have started noting random fliers at longer ranges. I have a reduced IPSC style steel plate. I was shooting at that at around 100 yards. I could pretty easily make hits. But it seems every now and then a random flier would crop up and pull low right of the target. However these fliers are random enough that its hard to track down a cause. Now Im a pretty decent shot but I had others shoot it and they would also confirm a random flier every now and again at longer ranges.
After talking with some people a few have mentioned that the SD simply isn't as accurate as a normal MP5. Which has got me thinking. Are these random fliers just a byproduct of the porting? Perhaps its from heat expanding here and there and moving metal slightly? Perhaps its from cleaning the can and not arranging the baffles in the same exact way(although that wouldn't explain the fliers after zeroing while shooting). Perhaps its even just me and others getting lazy with the sights. Im not sure. Im hesitant to say the fliers are getting better, but I have seemed to notice less fliers as more rounds get through the barrel.
Anyways its been bugging me enough that I want to ask others with SDs. Honestly I probably wouldn't even notice the fliers at normal subgun distances. But out to 75 or 100 yards these fliers can pull enough that the shot would be off a steel target of moderate size, but again they are random perhaps once in every 15 shots(if even that). I dont seem to have these fliers with the MP5 I built nor the K I bought.
Some more info about the gun to save questions
Home build
RCM internals
115 LP
.015 bolt gap
B&T SD barrel
TPM can
Pics
![]()
![]()
![]()
How accurate is your MP5D?
I built one earlier this year. It generally has more than acceptable accuracy. Holds fist sized groups at 25 yards. Honestly haven't papered it past that.
However I have started noting random fliers at longer ranges. I have a reduced IPSC style steel plate. I was shooting at that at around 100 yards. I could pretty easily make hits. But it seems every now and then a random flier would crop up and pull low right of the target. However these fliers are random enough that its hard to track down a cause. Now Im a pretty decent shot but I had others shoot it and they would also confirm a random flier every now and again at longer ranges.
After talking with some people a few have mentioned that the SD simply isn't as accurate as a normal MP5. Which has got me thinking. Are these random fliers just a byproduct of the porting? Perhaps its from heat expanding here and there and moving metal slightly? Perhaps its from cleaning the can and not arranging the baffles in the same exact way(although that wouldn't explain the fliers after zeroing while shooting). Perhaps its even just me and others getting lazy with the sights. Im not sure. Im hesitant to say the fliers are getting better, but I have seemed to notice less fliers as more rounds get through the barrel.
Anyways its been bugging me enough that I want to ask others with SDs. Honestly I probably wouldn't even notice the fliers at normal subgun distances. But out to 75 or 100 yards these fliers can pull enough that the shot would be off a steel target of moderate size, but again they are random perhaps once in every 15 shots(if even that). I dont seem to have these fliers with the MP5 I built nor the K I bought.
Some more info about the gun to save questions
Home build
RCM internals
115 LP
.015 bolt gap
B&T SD barrel
TPM can
Pics
↧
BaoFeng BF-888S Two Way Radio (Pack of 6) - $51.39 (Free S/H)
↧
Has this p7m8 been refinished?
Considering this gun in my local shop. They want $2400+tax inc matching box, scraper, brush and book. I was concerned because the SN is black and I've mostly seen them shiny. Do you think it's been refinished or someone cold blued the SN, or did some come like that? I'm still new to the P7 world so don't be too hard on me. I was going to offer $2200 for it.
Does the pricing and my offer seem in line?
I'll actually shoot it, and take care of it. But I don't want to get it if I'll never be able to get my money back out of it down the road because of the dark SN.
Thank you everyone.
Does the pricing and my offer seem in line?
I'll actually shoot it, and take care of it. But I don't want to get it if I'll never be able to get my money back out of it down the road because of the dark SN.
Thank you everyone.
↧
↧
Brownells BRN-7 HK417 Lower Receivers
I was just searching around and stumbled upon the new Brownells BRN-7 HK417 lower receivers. They’re in stock! Finally a way to build a pistol or “other firearm” 417 build.
https://www.brownells.com/rifle-part...rod124969.aspx
“BRN-7 Stripped Lower Receiver, machined from original HK417® forging out of Germany.
Brownells started with a raw HK417® forging, and had them machined by Primary Weapons Systems to be as authentic as possible. These lowers feature the classic contours of the HK417®, found on no other lower receiver. Selector markings are inspired by HK417® markings, with color filled pictogram markings. The FFL information is machined on the front of the magazine well, where the normal HK417® warning information is placed. Following machining, these receivers get a matte black Type III anodizing.”
![]()
![]()
![]()
![]()
![]()
https://www.brownells.com/rifle-part...rod124969.aspx
“BRN-7 Stripped Lower Receiver, machined from original HK417® forging out of Germany.
Brownells started with a raw HK417® forging, and had them machined by Primary Weapons Systems to be as authentic as possible. These lowers feature the classic contours of the HK417®, found on no other lower receiver. Selector markings are inspired by HK417® markings, with color filled pictogram markings. The FFL information is machined on the front of the magazine well, where the normal HK417® warning information is placed. Following machining, these receivers get a matte black Type III anodizing.”
↧
TruGlo Tritium Night Sights Low Set Glock 9/40 - $44.98 (login to get this price)
↧
Refurbished Gun Inventory @ WikiArms.com
↧
Cincinnati/northern Kentucky area gun smith
Does anyone in this area know of a gun smith that works on mp5 (clone)? The few I know are mostly glock/ar15 guys. Any recommendation are appreciated. I dont have a need now just for future use.
Thanks
Thanks
↧
↧
WTS: HK53 Barrel and Front End - 5.56 - 1x7 Twist - 178 Marked
HK53 Barrel and Front End - 5.56 - 1x7 Twist - 178 Marked - $1,099.99
https://www.gatewoodsupplyco.com/HK5...ed_p_1693.html
Gatewood Supply Company
https://www.gatewoodsupplyco.com
↧
WTS: HK 417 / HK MR762 Buffer
HK 417 / HK MR762 Buffer - $109.99
https://www.gatewoodsupplyco.com/HK-...er_p_1755.html
Gatewood Supply Company
https://www.gatewoodsupplyco.com
↧
WTS: HK 417 / HK MR762 Charging Handle
HK 417 / HK MR762 Charging Handle - $149.99
https://www.gatewoodsupplyco.com/HK-...le_p_1756.html
Gatewood Supply Company
https://www.gatewoodsupplyco.com
↧
MP5 Sear Spring Orientation...
Could someone please steer me in the right direction here?
I recently bought an MP5 clone (PRT 9CT) and was getting hammer follow/two-round bursts. I think I traced it back to having improperly re-assembly (totally my fault) of the trigger pack, specifically the sear spring. For "reasons" (muh German parts) I bought a semi auto trigger pack from a well known parts vendor. Their sear spring was assembled differently.
I'm talking about the "L" shaped sear spring seen here, not the roller style.
I believe that the sear part of it has to come down from the top and underneath the sear. Is there a trick to getting it in between the bolsters on the inside of the box?
I recently bought an MP5 clone (PRT 9CT) and was getting hammer follow/two-round bursts. I think I traced it back to having improperly re-assembly (totally my fault) of the trigger pack, specifically the sear spring. For "reasons" (muh German parts) I bought a semi auto trigger pack from a well known parts vendor. Their sear spring was assembled differently.
I'm talking about the "L" shaped sear spring seen here, not the roller style.
I believe that the sear part of it has to come down from the top and underneath the sear. Is there a trick to getting it in between the bolsters on the inside of the box?
↧
↧
I should have been warned
Somebody should have warned me about the hk bug. I went to pay on the VP 9 I have on layaway and the guy behind the counter says"hey we got a hk45c with six mags" . That was friday . So I called this morning asked about putting it on layaway and they said 60 buck down. Long story short I now have it on layaway. So it's looks like I've been bitten by the hk not that it sucks
↧
HK433 vs XM8 vs G36 Evolution
We do know that the G36 kinda kick started the whole AR-18 based modern modular rifle. We also know of the back and forth controversy about the G36's overheating/accuracy issues. It also seemed that the XM8 had similar issues when the US Army and USMC tested it. But I've seen some videos and photos and such on line, and it's obvious that the 433 is a modernized evolution of the XM8/G36 concept. The 433's upper and lower receiver interface seems similar to the XM8's, and mechanically, the 433 (based on patent illustrations) looks like a cross between a G36/XM8 and a FN SCAR.
The 433 has also taken things that have been added to the G36 and integrated them better, like an adjustable length of pull stock and 1913 rails. Not to mention that the 433's upper is either and aluminum extrusion or forging. That should go a long way to calming fears over the G36's overheating issues. I overall like the G36, but it is somewhat outdated compared to stuff like the FN SCAR and stuff that has been introduced following the start on the War on Terror. Even the SA80 A2 and A3 are a bit more up to date than the G36 is, which ironically the A2 and A3 versions of the SA80 were refurbished and updated by HK since 2000 to the present day.
Also, one advantage that the 433 seems to have over the XM8 and G36 as far as field stipping is the use of captive pins, something that HK didn't get into until the MG4 and HK416. That means less to lose as far as small parts when trying to work on the rifle. It also sucks that news on the 433 has been slow since this spring when HK and Concamo did a photoshoot with several 433s featured. Granted, it does seem that the German Army doesn't see the G36 replacement program as being insanely urgent, given that a selection was due to be made by early next year. However, that being said, it's mid September now.
So am I right or wrong in saying that this is how things have evolved with the 433 being a descendant of the G36?
The 433 has also taken things that have been added to the G36 and integrated them better, like an adjustable length of pull stock and 1913 rails. Not to mention that the 433's upper is either and aluminum extrusion or forging. That should go a long way to calming fears over the G36's overheating issues. I overall like the G36, but it is somewhat outdated compared to stuff like the FN SCAR and stuff that has been introduced following the start on the War on Terror. Even the SA80 A2 and A3 are a bit more up to date than the G36 is, which ironically the A2 and A3 versions of the SA80 were refurbished and updated by HK since 2000 to the present day.
Also, one advantage that the 433 seems to have over the XM8 and G36 as far as field stipping is the use of captive pins, something that HK didn't get into until the MG4 and HK416. That means less to lose as far as small parts when trying to work on the rifle. It also sucks that news on the 433 has been slow since this spring when HK and Concamo did a photoshoot with several 433s featured. Granted, it does seem that the German Army doesn't see the G36 replacement program as being insanely urgent, given that a selection was due to be made by early next year. However, that being said, it's mid September now.
So am I right or wrong in saying that this is how things have evolved with the 433 being a descendant of the G36?
↧
WTS HK417 Picatinny Handguard 12.9" with AGB Cutout $450 shipped.
Selling a new HK417 Picatinny Handguard 12.9" with AGB Cutout $450 shipped.
Willing to trade for a standard short picatinny and $250 cash on top.
![Click image for larger version.
Name: 20190914_085716.jpg
Views: 7
Size: 2.92 MB
ID: 241690]()
Willing to trade for a standard short picatinny and $250 cash on top.
↧