↧
Taurus 856 Ultra Lite .38 Special Revolver from $249 ($224 after $25 MIR)
↧
HK MR762A1 w/ aftermarket rail and bipod for $2850
Found this, seems like a really good deal considering accessories
https://www.kitterytradingpost.com/n...cgid=0#start=1
https://www.kitterytradingpost.com/n...cgid=0#start=1
↧
↧
WTS: HK G3, A3 Style Collapsible Stock $185 shipped
German Factory original collapsible stock for the H&K 91 and G3 rifles $185 shipped Venmo/PayPal ff preferred
![Click image for larger version.
Name: image4.jpeg
Views: 19
Size: 3.75 MB
ID: 241894]()
![Click image for larger version.
Name: image5.jpeg
Views: 20
Size: 3.32 MB
ID: 241896]()
↧
Semi auto ambi trigger pack questions
I recently acquired a semi auto ambidextrous trigger pack. It is missing the safety/selector lever, the pin for the safety/selector lever, the sleeve that holds safety selector spring in place, the spring, and also the smaller pin of unknown diameter that holds and place the sleeve and spring for the safety/selector lever.
I have found sources for the safety/selector lever, sleeve, spring, and 3.2 mm pin for the safety/selector lever. The pin that holds in the sleeve and spring is slightly larger than 2.4 mm but smaller than 2.8 mm I don't know the exact size of that pin nor can I find it anywhere online. I am also having trouble finding much information about non burst ambidextrous trigger packs. Can anyone help provide a source for obtaining the pin that I am in need of? I am pointing to the hole that I'm referencing with a punch.
![]()
![]()
I have found sources for the safety/selector lever, sleeve, spring, and 3.2 mm pin for the safety/selector lever. The pin that holds in the sleeve and spring is slightly larger than 2.4 mm but smaller than 2.8 mm I don't know the exact size of that pin nor can I find it anywhere online. I am also having trouble finding much information about non burst ambidextrous trigger packs. Can anyone help provide a source for obtaining the pin that I am in need of? I am pointing to the hole that I'm referencing with a punch.
↧
Intro
I bought a BRN-4 lower so I guess I'm one of you insufferable freaks who absolutely insists on making life harder for myself instead of buying a fully functioning (and warrantied) firearm. First handgun was a USP 9 because I had the original rainbow 6 for PC as a kid and the cover art is etched in my subconscious (I know I'm not the only one...)
Currently very happy with *almost* entirely stock USP 45 & VP9 LE to fit the stereotype poor HK fanboy.
Not new to projects, 10+ years experience in mild to moderate gunsmithing, competitive shooting (prs), lost count on how many straight AR15s I've built. Sold some, still have a few, but the 416 is the white whale. I know enough to know that it is a different beast, and I've lurked though enough threads and figured it was time to join up to get in on some of the weird parts that show up here more often than the rest of the internet.
Anyways, onward an upward to proving myself a legitimate user and not a spam account.
Currently very happy with *almost* entirely stock USP 45 & VP9 LE to fit the stereotype poor HK fanboy.
Not new to projects, 10+ years experience in mild to moderate gunsmithing, competitive shooting (prs), lost count on how many straight AR15s I've built. Sold some, still have a few, but the 416 is the white whale. I know enough to know that it is a different beast, and I've lurked though enough threads and figured it was time to join up to get in on some of the weird parts that show up here more often than the rest of the internet.
Anyways, onward an upward to proving myself a legitimate user and not a spam account.
↧
↧
Tube parts too tight, use these
When it wants to come apart at the wrong seam, etc, try a set of aircraft cannon plug pliers. They have a soft rubber jaw inserts that can be replaced. Just google, they are cheap enough to just buy two and not worry about it no mo !.
Works to remove from 1/2-28 threads also.
Sent from my iPhone using Tapatalk
Works to remove from 1/2-28 threads also.
Sent from my iPhone using Tapatalk
↧
WTS: Nib hk 45t
Unfired, new in box. $700 shipped
![]()
![]()
![]()
↧
CZ P-10 C $319, S&W Model 65 $449, Springfield Defender XD $249, Barrett M99 $4299, CI RAS47S $522, S&W M&P 15-22 w/Gear $329
CZ P-10 C $319, S&W Model 65 $449, Springfield Defender XD $249, Barrett M99 $4299, CI RAS47S $522, S&W M&P 15-22 w/Gear $329, Bushnell AR Optics $106, Anderson 80% Lower $35, Polymer80 Glock Lower $89, Vortex Strike Eagle w/Mount $229, Trijicon MRO $333
Subscribe to our weekly newsletter to get the best deals directly in your inbox. Click HERE to subscribe!
Subscribe to our weekly newsletter to get the best deals directly in your inbox. Click HERE to subscribe!
↧
WTS HK scope claw mount 30mm rings $220 shipped
HK scope Claw mount 30mm rings $220 shipped Venmo/PayPal f&f preferred
![Click image for larger version.
Name: image6.jpeg
Views: 10
Size: 1.67 MB
ID: 241900]()
![Click image for larger version.
Name: image8.jpeg
Views: 10
Size: 1.78 MB
ID: 241902]()
![Click image for larger version.
Name: image9.jpeg
Views: 10
Size: 1.58 MB
ID: 241904]()
↧
↧
Building a hk417 out of brn 7 and brownells parts kit
In past few days brownells released their brn 7 lower which is similar to the brn 4-German forgings finished by PWS.
Yesterday I ordered one along with their hk417 parts kit. But today I suddenly remembered things about 922r so I wonder for those of you who bought and used kit how did you get around this?
Since those are de-milled parts Id think 922r does apply, correct me if Im wrong though.
Thanks for any input in advance!
Yesterday I ordered one along with their hk417 parts kit. But today I suddenly remembered things about 922r so I wonder for those of you who bought and used kit how did you get around this?
Since those are de-milled parts Id think 922r does apply, correct me if Im wrong though.
Thanks for any input in advance!
↧
WTB: MP5K FA Bolt Carrier
Looking for a HK factory full auto date coded MP5K bolt carrier. Prefer IK date code but will consider others. Please PM or email with what you have. Thanks for the assistance.
↧
WTS: zenith z-5rs mke pistol 9mm
ZENITH Z-5RS MKE PISTOL 9MM 1849.
https://www.hkspecialiststore.com/pr...e&pageNumber=1
https://www.hkspecialiststore.com/pr...e&pageNumber=1
↧
Wts/zenith z-5rs mke pistol 9mm
ZENITH Z-5RS MKE PISTOL 9MM 1849.
https://www.hkspecialiststore.com/pr...e&pageNumber=1
https://www.hkspecialiststore.com/pr...e&pageNumber=1
↧
↧
MP7 - New Toy!
New toy just received!
![Click image for larger version.
Name: fullsizeoutput_5.jpeg
Views: 11
Size: 4.06 MB
ID: 241928]()
↧
PTR 9KT SB Tactical Brace Buffer Chewed
Was stripping my 9KT with an SB Tactical Brace (K-model) when I noticed all this blue polymer "shavings" in the reciever and trigger housing. Turns out the SB brace buffer was almost completely chewed up and gone. WTF? I contacted SB Tactical and they claim the buffer only lasts about 1000 rounds. To their credit, they are sending me a few replacements for free. Does any one else have this problem?
↧
Ruger AR-556 5.56 NATO Rifle w/M-LOK from $469
↧
VP9 + Magwell = Magazine not loading properly
I recently purchased a new VP9 (700009GRLEA5) from Bud's. It came with three 15-round magazines. I also purchased two five-round magazine extensions (here) and a steel EDC Magwell (here) from hkparts.net. The Magwell says "VP9" on the inside.
The magwell is a very tight fit, and somewhat hard to install (unlike I've seen in online videos). After installing, the magazines become very hard to load, and require a strong push. Moreover, they do not drop out when the magazine release is pushed. Instead, I have to push the magazine release and then pull the magazine out. The problem exists when loading a factory 15-round magazine as well as a factory 15-round magazine with a five-round magazine extension attached. It seems that the magwell has somehow squeezed the handle a little too tight, thereby impeding a smooth magazine load/unload. When loading a magazine, you can feel it get tight about halfway up the handle. When the magwell is removed, the problem goes away.
Has anyone else had this problem? Does anyone have any pointers on fixing it?
Thank you.
The magwell is a very tight fit, and somewhat hard to install (unlike I've seen in online videos). After installing, the magazines become very hard to load, and require a strong push. Moreover, they do not drop out when the magazine release is pushed. Instead, I have to push the magazine release and then pull the magazine out. The problem exists when loading a factory 15-round magazine as well as a factory 15-round magazine with a five-round magazine extension attached. It seems that the magwell has somehow squeezed the handle a little too tight, thereby impeding a smooth magazine load/unload. When loading a magazine, you can feel it get tight about halfway up the handle. When the magwell is removed, the problem goes away.
Has anyone else had this problem? Does anyone have any pointers on fixing it?
Thank you.
↧
↧
MG5 vs. MG3! Welches Maschinengewehr der Bundeswehr ist besser?
↧
WTB: G11 Space Soldier Shirt
i thought this would be the most appropriate place for this, but if not, please delete....
Since FedEx lost my package, I am looking for a G11 Space Soldier shirt in L or XL. Talked to customer service and the most recent run of these was the last :(
Since FedEx lost my package, I am looking for a G11 Space Soldier shirt in L or XL. Talked to customer service and the most recent run of these was the last :(
↧
WTS: USP Tactical frame parts set (lower parts, no slide, frame or sear spring)
I recently bought a USP45 Tactical parts kit for the slide. I don't need the frame parts, so they're for sale.
As best I can tell the only parts missing are the frame itself and the match sear spring.
Included are:
Match trigger with trigger stop
trigger return spring (could be/should be Match, but I have no way of knowing this one)
trigger axle
trigger bar
Match hammer, axle and strut
Match hammer spring
1+2 detent plate and associated parts
hammer spring retainer and pin
slide release
trigger bar and detent/spring
disconnector
catch and control latch
mag release and pin
I'll confirm the rest tonight, but I'm pretty certain its everything to finish off a stripped frame less the sear spring.
Condition of the parts is very, very nice. The slide looks almost new compared to my new Expert slide, and there is very little wear on the barrel, so it looks like the frame parts were used for maybe hundreds of rounds and not thousands.
Price is $100 shipped USPS CONUS
I'll post a couple photos tonight.
As best I can tell the only parts missing are the frame itself and the match sear spring.
Included are:
Match trigger with trigger stop
trigger return spring (could be/should be Match, but I have no way of knowing this one)
trigger axle
trigger bar
Match hammer, axle and strut
Match hammer spring
1+2 detent plate and associated parts
hammer spring retainer and pin
slide release
trigger bar and detent/spring
disconnector
catch and control latch
mag release and pin
I'll confirm the rest tonight, but I'm pretty certain its everything to finish off a stripped frame less the sear spring.
Condition of the parts is very, very nice. The slide looks almost new compared to my new Expert slide, and there is very little wear on the barrel, so it looks like the frame parts were used for maybe hundreds of rounds and not thousands.
Price is $100 shipped USPS CONUS
I'll post a couple photos tonight.
↧